Brick In The Wall

Brick In The Wall Pixo Bathroom Downlight

Name: Brick In The Wall Pixo Bathroom Downlight
Brand: Brick In The Wall
SKU: 30232504
Price: 280.0 EUR
Availability: InStock

€280,00 EUR

€280,00 EUR ~~€280,00 EUR~~

Tax included. Shipping calculated at checkout.

30232504

Plaster recessed bathroom downlight with IP54 protection and CRI 92. Square stepped frame with circular aperture designed to integrate flush into any ceiling finish.

IP54 rated — suitable for bathroom splash zones
CRI 92 for accurate, flattering light quality
Plaster finish integrates flush into any ceiling
Square stepped frame with geometric circular aperture
Deep-set aperture minimises glare at source
Designed to be painted and made invisible

One of the most common specification mistakes in bathroom lighting is treating the ceiling as an afterthought — choosing a fitting that works electrically but visually disrupts an otherwise considered interior. Standard downlights announce themselves. Sometimes that is exactly what you do not want.

For bathrooms and damp locations, two things matter beyond aesthetics: protection rating and light quality. IP54 means the fitting is protected against dust ingress and water splashing from any direction — suitable for bathroom zones where moisture is present but direct water contact is not expected. CRI 92 means the light renders colours with high accuracy (a score of 90 and above is considered excellent for residential and hospitality interiors), so skin tones, tiles, and finishes all read as they should.

The Brick In The Wall Pixo Bathroom Downlight addresses both the aesthetic and the technical brief. Brick In The Wall are Belgian specialists in plaster-integrated lighting — their fittings are engineered to be skimmed, painted, and finished so that the light source disappears into the ceiling plane entirely. The Pixo features a square outer frame with a distinctive stepped architectural profile and a central circular tapering aperture that directs light downward while housing the source deep enough to control glare. With a CRI of 92 and an IP54 rating, it is a considered choice for bathrooms where quality of light and seamless integration both matter.

The form is deliberate: the contrast between the square exterior and the circular recessed aperture gives the Pixo its own quiet geometric character, while the smooth chalky plaster surface is designed to accept paint — meaning it can be finished to match the ceiling exactly and become, effectively, invisible. This is specification-led design at its most resolved.

The Pixo is a plaster and ceramic construction fitting. As with all Brick In The Wall products, installation involves plastering the fitting into the ceiling substrate — this is not a clip-in downlight and requires coordination between the lighting installer and the finishing trades. Confirm lamp, driver, and dimming requirements directly with your specification, as these may be configured as part of the Brick In The Wall system. IP54 protection makes it suitable for bathroom use in splash-risk zones.

At Lightsource Mallorca, we work with Brick In The Wall because their approach to integrated plaster lighting solves a real specification problem — not just aesthetically, but technically. We help you confirm the right configuration for your ceiling build-up, coordinate lead times with your contractor programme, and make sure the installation detail is right before work starts, not after.

Dimensions

Length (cm): 13
Recessed depth (cm): 9
Width (cm): 11

Functionality

Materials-specific: Plaster / Ceramic
Operating voltage: 230V
Includes bulbs: No
F-norm rated: No
Cri: 92
Includes driver: No
Cable excluded?: No
Driver location: Remote

Certifications & Ratings

Recommended application surface: Ceiling
IP rating: IP54
CE (EU directive) compatible?: Yes
Safety classification: Class III
Interior / exterior restrictions: Suitable for Both Interior and Exterior Use

Brick In The Wall Lighting

Belgian Lighting

Brick In The Wall are Belgian lighting specialists with a clear and singular focus: making light fittings that vanish into architecture. Their products are engineered for integration designed to be plastered, skimmed, and painted into ceilings and walls so that only the light itself remains visible. This is not a decorative conceit but a genuine technical discipline, requiring precise engineering of the fitting body, heat management, and finish compatibility. For specification-led projects where the architecture should lead and the light source should disappear, Brick In The Wall occupies a category of its own. Their products are a trusted choice for architects and interior designers working at the level where detail matters.

Visit Brick In The Wall Lighting

Manufacturer Part Numbers

2700K	27329031
3000K	27329131

FAQs

What does IP54 mean and which bathroom zones is the Pixo suitable for?

IP54 means the fitting is protected against limited dust ingress and water splashing from any direction. This makes it suitable for bathroom areas where moisture or occasional splashing is possible, but not for zones directly above a bath or shower where water jets or immersion are likely. If in doubt, check your zone layout against IEC 60529 classifications — we can help with this.

What is CRI 92 and why does it matter in a bathroom?

CRI stands for Colour Rendering Index — it measures how accurately a light source shows the true colours of surfaces and skin tones compared to natural daylight. A score of 92 is considered high quality (90+ is the threshold for excellent rendering), meaning tiles, finishes, and skin tones will all look as intended rather than washed out or shifted.

Can the Pixo be painted to match the ceiling?

Yes. The plaster and ceramic construction is specifically designed to be skimmed and painted as part of the ceiling finish. This is the defining characteristic of Brick In The Wall products — the fitting is intended to disappear into the ceiling plane entirely once decorated.

Is this a standard clip-in downlight or does it require specialist installation?

The Pixo is not a clip-in or surface-fix downlight. It is a plaster-integration fitting that needs to be set into the ceiling substrate before finishing — which means the lighting installer and plastering trades need to work in sequence. This is standard practice for Brick In The Wall products and should be planned into the construction programme from the start.

Are lamp and driver included with the Pixo?

Lamp and driver configuration for the Pixo should be confirmed at the point of specification, as Brick In The Wall products are often supplied as part of a configurable system. Contact Lightsource Mallorca to confirm what is included and what needs to be specified separately for your project.

Delivery & Returns

Please review our Shipping and Returns policies to learn how your order will arrive to your project.

We gladly offer our guests up to 30 days from delivery to return or exchange this merchandise to ensure your satisfaction. To process a return or exchange, we require you to provide the original receipt. Before finalizing your purchase, please verify measurements, finishes and light sources. Delivery and handling fees are not refundable. Please Note: Custom or Made-to-order items cannot be returned or exchanged. For more information, please see our Terms & Conditions.

I just wanted to let you know about an incredibly positive experience I've had with LDO. They understood my needs and showed an incredible amount of flair and patience.

Shruti, London
They responded quickly to our inquiries and brought creative, innovative ideas to the table. From concept to completion, they expertly problem-solved and helped us save money. Highly recommend them to anyone purchasing lighting.

Brandon from BD Electrical
You have been fantastic to work with and thanks so much for your time and support

Salvatore, Designed by Woulfe, London

LANGUAGE

COUNTRY/REGION